Description

Send Inquiry

Application	Automotive Cooling System
Product Name	Radiator Cooling Fan
Brand Name	Neutral
OEM	9826929880 9832186380
Material	PA66
Warranty	12 months/3000 hours
MOQ	20 PCS
Packing	neutral packing or customized packing
Payment	T/T
Type	Aftermarket
Place of Origin	Jiangsu, China (Mainland)

The cleaning and lubrication of the PEUGEOT 208 (2019-2023 models) electronic fan should follow the following steps:

1. Cleaning process

Power outage and protection

Ensure the vehicle is turned off and disconnect the negative terminal of the battery to avoid the risk of short circuit.

Surface dust removal

Use compressed air or a soft bristled brush to remove dust from the fan blades and motor casing, and avoid using high-pressure water guns for flushing.

Deep cleaning (optional)

If the oil pollution is severe, neutral cleaning agents (such as diluted detergent) can be sprayed onto non-woven fabric to wipe the fan blades, avoiding the motor and wiring harness interface.

2. Lubrication maintenance

Lubricant selection

Use high-temperature motor specific lubricating oil (such as silicon-based grease), and prohibit the use of edible oil or ordinary engine oil.

Lubrication operation

Find the oil injection hole for the motor bearing (usually located at the end of the motor shaft) and add 1-2 drops of lubricating oil.

Manually rotate the fan blades to evenly distribute the oil and avoid excessive spread of oil stains.

3. Precautions

Do not disassemble: It is not recommended to disassemble the electronic fan assembly for non professional maintenance to avoid damaging the sealing structure or circuit.

Drying test: After cleaning, it needs to be completely dried before powering on to prevent short circuits.

Periodic recommendation: Check the lubrication status every 2 years or after driving 40000 kilometers.